- overview
- technical datasheet
- options
MISTRAL 3533
INDUSTRIAL VACUUM CLEANER FOR DUST AND SOLID MATERIAL
Suction unit
The suction unit is a turbine motor of the “side channel blower” type: the fan being directly shafted on the motor shaft, this type of motor requires no transmission system and provides a performance of 2.850 RPM. It is thus completely maintenance free, ideal for non-stop and heavy duty performance, very silent and resistant. The control board includes the motor switch, with safety cut off, a vacuum indicator. A diffuser filter reduces the speed and noise of the air on the exhaust.
Filter unit
The filter is placed and protected inside the steel filter chamber; the polyester star filter provides a filter surface of 20.000 cm2, and high filtration efficiency (class L, 3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The frontal aluminium die-cast suction inlet (Ø80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material (the latter only within the capacity of the container), with no need to change or take out the filter
Collection unit
The vacuumed material is placed inside a drop-down bin mounted on wheels (35 litres capacity), operated by user friendly handles placed at operator’s height, which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag.
The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes; all metal parts of the vacuum are epoxy painted.
- overview
- technical datasheet
- options
| MODEL | MTL 3533 | |
| Tension | Volt HZ |
230 – 400 3~ 50/60 |
| Power | KW HP |
2,2 3 |
| Depression max. | mm.H2O | 3.000 |
| Depression (max. on continuous duty) | mm.H2O | 2.200 |
| Air flow max. | M3/h | 300 |
| Filter | Polyester | |
| Filter surface | Cm2 | 20.000 |
| Filter category | Cat/ Micron | L >3 |
| Air load on filter | M3/M2/h | 150 |
| Capacity | Lt. | 35 |
| Suction inlet | ∅ mm. | 80 |
| Noise level | dB(A) | 68 |
| Protection | IP | 55 |
| Dimensions | cm | 98 x 55 |
| Height | cm | 115 |
| Weight | Kg | 85 |
- overview
- technical datasheet
- options
| Application | Code | Description |
| Sticky dust and material | PTFE | PTFE treated star filter (reduces the adherence of the dust on the filter) |
| High temperature dust and material | NOMEX | Nomex flame proof filter, resistance up to 250° C |
| Fine dust subject | C | Polyester star filter with 1 micron efficiency |
| Very fine dust | A | Absolute filter (BIA certified) with 99,995% efficiency on dust as small as 0,18 micron |
| Dust and material subject to accumulate static electricity | ANT | Antistatic star filter |
| Fine dust subject to accumulate static electricity | ANT/C | Antistatic star filter, 1 micron efficiency |
| Fine dust - class M | C (CLASS M) | 1 micron star filter, pressure relief valve, certificate for the suction of fine dust of class “M” |
| Very fine and / or toxic dust – class H | A C (CLASS H) | 1 micron star filter, pressure relief valve, absolute filter (BIA certified) with 99,995% efficiency on dust as small as 0,18 micron, certificate for the suction of very fine and toxic dust of class “H”. |
| Corrosive dust and material | X | Stainless steel container AISI304 |
| Corrosive dust and material | XX | Stainless steel container and filter chamber AISI304 |
Different combinations of the above options are possible (e.g. ACX , vacuum with Absolute filter, 1 micron star filter and stainless steel container)