• overview
  • technical datasheet
  • options

DM3 100 AIR

AIR OPERATED WET AND DRY INDUSTRIAL VACUUM

Suction unit

The vacuum cleaner DM3 AIR is a compressed air vacuum cleaner powered by two powerful Venturi suction units, (using no electric or mechanical components), placed inside a sturdy steel casing, and thus protected against any external damage; special noise buffers reduce the noise within the safety standards of work and the exhausted air is conveyed towards the ground, so as not to bother the user and not to raise possible dust in the neighbouring area. The control board includes an air pressure gauge (to check the pressure of the incoming air supply) and vacuum indicator, useful to detect possible clogging of the filter. Two handles placed on the sides enable an easy lifting and removal of the suciton head, for possible inspection or replacement of the underlying filter.

 

Filter unit

The vacuumed material is placed inside a drop-down bin mounted on wheels (100 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag.

The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes. A compressor (not included) is needed to operate the vacuum.

 

Collection unit

The vacuumed material is placed inside a drop-down bin mounted on wheels (100 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag. The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes. A compressor (not included) is needed to operate the vacuum.

  • overview
  • technical datasheet
  • options

MODEL   DM3 100AIR
Suction unit Type Venturi
Operating pressure Bar 6
Air supply required M3/h 150
Max. Vacuum rate* mm.H2O 5000
Max. Air flow rate** M3/h 300
Filter type Star Antistatic polyester
Filter surface Cm2 30.000
Filter efficiency CAT (BIA)
Micron		 L
>3
Air load on filter M3/M2/h 100
Bin collection capacity Lt. 100
Suction inlet ø 80
Noise level dB(A) 75
Dimensions cm 62 x 62
Height cm 160
Weight Kg 80

* Measured with fully closed suction inlet, calculated at a constant pressure of 6 Bars measured on the vacuum’s pressure gauge
* Measured with fully open suction inlet, calculated at a constant pressure of 6 Bars measured on the vacuum’s pressure gauge

  • overview
  • technical datasheet
  • options

Application Code Description
Sticky dust and material PTFE PTFE treated star filter (reduces the adherence of the dust on the filter), 1 micron efficiency
High temperature dust and material NOMEX Nomex flame proof filter, resistano up to 250° C temperatures
Dust and material subject to accumulate static electricity ANT Antistatic star filter
Fine dust subject to accumulate static electricity ANT/C Antistatic star filter, 1 micron efficiency
Fine dust C (CLASS M) 1 micron star filter,  certificate for the suction of fine dust of class “M”
Very fine dust A Absolute filter (BIA  certified) with 99,995% efficiency on dust as small as 0,18 micron
Very fine and / or toxic dust AC (CLASS H) 1 micron star filter, absolute filter (BIA  certified) with 99,995% efficiency on dust as small as 0,18 micron, safety disposal system certificate for the suction of very fine and toxic dust of class “H”.
Corrosive dust and material X Stainless steel container AISI304
Corrosive dust and material XX Stainless steel container and filter chamber AISI304
Highly corrosive dust and material, corrosive vapours XXX Complete AISI304 stainless steel construction, including chassis, most internal metal parts, container and filter chamber
Dust and material subject to accumulate static electricity MT Grounding of metal parts in order to make them electrically conductive 

Different combinations of  the above options are possible (e.g. ACX , vacuum with Absolute filter, 1 micron star filter and stainless steel container)